View previous topic :: View next topic |
Author |
Message |
eliasuk98 Astra Newbie
Joined: 31 May 2005 Posts: 20
Location: birmingham uk
|
Posted: Fri Mar 19, 2010 7:18 am Post subject: body panels gm vs aftermarket |
|
|
guys im in a dilema, ive just bought loads of gm panels from opel germany, but some parts they dont have, such as sills and passenger side complete quater panel.. regards sills i can get hold of copy parts... what do you guys think of the copy parts?? quality of material etc.. cheers _________________ Always ------> Mk1 |
|
Back to top |
|
|
mk indy blade Astra Expert
Joined: 08 Aug 2005 Posts: 1715
Location: west yorkshire
|
Posted: Fri Mar 19, 2010 8:39 am Post subject: |
|
|
patten parts are ok like sills but dont use them on wings dorrs they do not fit right |
|
Back to top |
|
|
Mark1GTE wee mark
Joined: 28 May 2005 Posts: 4402
Location: Scotland
|
Posted: Fri Mar 19, 2010 9:58 am Post subject: |
|
|
gm never produced a full sill anyway,only a centre section about the length of the door that then tied in with a sill section attached onto the rear quarter section panel etc if that makes sense
pattern sills,rear corners etc are fine but as brookie said wings etc can be a hit or miss for alignment etc but can be made to fit with patience and a bit of luck
hadrian panels are not the worst pattern panels imo and you don`t need to fit the full panel just cut out what you require from the new panel to be welded in to fix the rotten area and then blend it back in |
|
Back to top |
|
|
|