GT/Estate Astra Expert
![Astra Expert Astra Expert](images/ranks/3.gif)
![](images/avatars/56727972342ec07979aba6.jpg)
Joined: 30 May 2005 Posts: 2230
Location: Rotherham
|
Posted: Thu Jan 19, 2012 8:23 pm Post subject: Setting up the gear selector |
|
|
put your car in neutral
undo the pinch bolt on gear linkage by the selector
pull out this plug (some newer gearboxs have a plug you can push to lock in place and have a spring on them)
(top picture)
on an f10 or f16 you need a 5mm drill bit on f20 you need 4.5mm but a 4mm will probably do
put bit into hole
(middle picture)
whilst looking towards the front of the car twist the selector anti clockwise, this will only twist if it is in neutral. it only twists about 30 degrees.
whislt twisting selector, push the drill bit in and it should go in an extra 1 cm and that is locked.
go back to the gear stick and line it up like so (page 102 haynes)
(bottom picture)
it's easier if someone holds gearstick in this position.
then tighten pinch bolt at selector
remove drill bit and replace plug _________________ 1983 5dr project 1.4Ti in china blue
1983 SR in mat black rat on the road again
1980 5dr Opel estate (9 year ongoing project) |
|